Wand Emulation; Wand Emulation Connection - Honeywell 2020 User Manual

2020 Host Escape Commands
Command
<ESC> a
<ESC> b
<ESC> 1
<ESC> 2
<ESC> 3
<ESC> 4
<ESC> 5
<ESC> 6
<ESC> 7
<ESC> 8

Wand Emulation

Wand Emulation Connection

The Wand Emulation Connection bar codes should be used if you want to
change the terminal ID only , without changing any other image scanner set-
tings. We recommend using Wand Emulation Plug & Play bar codes to pro-
gram your image scanner to emulate a wand reader. The Wand Emulation Plug
& Play bar codes change other parameters, in addition to changing the terminal
ID. Please refer to
mation.
In Wand Emulation mode, the image scanner decodes the bar code then sends
data in the same format as a wand scanner. The Code 39 Format converts all
symbologies to Code 39.
2 - 20
Action
Double beeps to indicate a successful menu change was
made.
Triple beeps to indicate a menu change was unsuccessful.
The green LED illuminates for 135 milliseconds followed by a
pause.
The green LED illuminates for 2 seconds followed by a
pause.
The green LED illuminates for 5 seconds followed by a
pause.
Emits a beep at a low pitch.
Emits a beep at a medium pitch.
Emits a beep at a high pitch.
Beeps to indicate a successful decode and communication to
host.
Triple beeps to indicate a decode/communication to host was
unsuccessful.
Wand Emulation Plug & Play on page 2-2 for further infor-