Related Manuals for Honeywell Xenon XP 1950h
Summary of Contents for Honeywell Xenon XP 1950h
- Page 1 Xenon™ XP 1950h Corded Area-Imaging Scanner for Healthcare Quick Start Guide 1950HC-EN-QS Rev B 4/19...
-
Page 2: Get Started
Agency Model: 1950 Note: Refer to your User Guide for information about cleaning your device. Get Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. Power Supply Assembly (if included) Note: The power supply must be ordered separately, if needed. - Page 3 Connect the Scanner USB:...
- Page 4 Keyboard Wedge: RS232 Serial Port:...
-
Page 5: Reading Techniques
Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Standard Product Defaults The following bar code resets all standard product default set- tings. -
Page 6: Usb Pc Keyboard
USB PC Keyboard Scan the following code to program the scanner for a USB PC Keyboard. USB PC Keyboard Epic Scan the following bar code to configure your device to commu- nicate with an Epic software application. EMR Application Meditech® Scan the following bar code to configure your device to commu- nicate with a Meditech software application. - Page 7 Quiet Operations The following codes configure the scanner for quiet modes that do not disturb resting patients. Silent Mode with Flashing LED Scan the following bar code to completely silence the scanner. When a bar code is scanned, the LED and aimer flash 5 times. Green indicates a good scan, red indicates a bad scan.
- Page 8 Very Low Beeper (Nighttime Mode) The following bar code programs the scanner for a very low beep. When a bar code is scanned, the scanner emits a very soft beep. Nighttime Mode Low Beeper (Daytime Mode) The following bar code programs the scanner for a low volume. When a bar code is scanned, the scanner emits a low beep.
- Page 9 Streaming Presentation™ When in Streaming Presentation mode, the scanner leaves the scan illumination on all the time and continuously searches for bar codes. Streaming Presentation Mode Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code.
-
Page 10: Add Code Id Prefix To All Symbologies
Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Add Code ID Prefix To All Symbologies (Temporary) Note: For a complete list of Code IDs, see the User Guide for your product. - Page 11 France Germany/Austria Great Britain Italy Norway Spain Switzerland Note: For a complete list of country codes, see the User Guide for your product.
- Page 12 Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
- Page 13 This document contains proprietary information that is pro- tected by copyright. All rights are reserved. No part of this docu- ment may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright 2019 Honeywell International Inc. All rights reserved.