Data Format Editor; Data Formatter - Honeywell 2020 User Manual

Data Format Editor

Enter Data Format
* Default Data Format
Clear One Data Format
Clear All Data Formats
Save
Discard

Data Formatter

When Data Formatter is turned off, the bar code data is output to the host as
read (including prefixes and suffixes). Choose one of the following options.
Default = Data Formatter On, but Not Required.
* Data Formatter On,
but Not Required
Data Formatter Off
When Data Formatter is required, all input data must conform to an edited for-
mat or the image scanner does not transmit the input data to the host device.
Data Format On, Format Required
6 - 5