Conferencing A Held Call With An Active Call; Using Conference Bridges; Conference Menu Options - Cisco SPA 504G User Manual

Using Basic Phone Functions

Using Conference Bridges

STEP 3
Using Conference Bridges
STEP 1 Press the confserv softkey.
STEP 2 Follow the Conference Bridge voice prompts.
STEP 1 Enter your extension then press #.
STEP 2 Enter conference ID then press #.
Cisco Small Business Pro IP Phone SPA 504G User Guide (SIP)
Press the conf softkey again. All three parties are connected in the conference call.
When you hang up, the other two parties are disconnected.

Conferencing a Held Call with an Active Call

If you have a call on hold and an active call, you can create a conference call between the
active call, the call on hold, and you.
With an active call and one or more calls on hold, press the confLx softkey.
• If you have only one call on hold, the conference call is created between the three of
you.
• If you have more than one call on hold, choose the held call you want to conference in
by pressing the line button of the call on hold.
A key business tool, the conference bridge allows users with an extension and voicemail
passwords to schedule and manage conference calls.
Basic functionality includes the ability to create and log into conference bridges. There are
also administrator modes that allow calling out and dropping parties from the bridge.
Conference bridge supports up to 20 connected callers. An unlimited number of conference
bridges can be in session at the same time.
To call into a conference bridge:

Conference Menu Options

Enter a Conference - (Option 1):
3
39