Cisco TelePresence SX20 Quick Set Administrator's Manual page 99

Cisco TelePresence SX20 Quick Set
Contents
Video Input Source [2] Connector
Select which video input connector to be active on video input source 2.
Requires user role: ADMIN
Value space: <DVI>
DVI: Select DVI-I when you want to use the DVI-I 2 as input source 2.
Video Input Source 2 Connector: DVI
Example:
Video Input Source [3] Connector
Not applicable in this version.
Video Input Source [1..3] Type
Set which type of input source is connected to the video input. NOTE: Video input source 3 is
not supported in this version.
Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera>
Other: Select Other when some other type of equipment is connected to the selected video
input.
Camera: Select Camera when you have a camera connected to the selected video input.
PC: Select PC when you have a PC connected to the selected video input.
DVD: Select DVD when you have a DVD player connected to the selected video input.
Document_Camera: Select Document_Camera when you have a document camera
connected to the selected video input.
Video Input Source 1 Type: PC
Example:
D14908.06 SX20 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface System settings System settings
Video Input Source [1..3] PresentationSelection
Define how the video system will behave when a presentation source is connected to the video
input. In general, any input source can be used as a presentation source; normally, the main
camera (self-view) will not be used as a presentation source. Note that sharing the presentation
with the far end always requires additional action (tap Start Presenting on the Touch screen
control panel, or press the Presentation key on the remote control).
NOTE: Video input source 3 is not supported in this version.
Requires user role: ADMIN
Value space: <Manual/Automatic/OnConnect/Hidden>
Manual: In manual mode (default value), the contents of the input source will not be
presented on the screen until you select it. Use either the remote control or the Touch
screen control panel to choose which input source to present.
Automatic: In automatic mode, the content on the input source will be presented on screen
automatically. If more than one source is set to Automatic, the last connected source will be
used. If any content was active (presented) when the call was disconnected, the content will
still be displayed locally.
OnConnect: When in on-connect mode, the content on the input source will be presented
on screen when a cable is connected. Otherwise, the behavior is like when in manual mode.
Hidden: In hidden mode, the contents of the input source do not appear in the graphical user
interface.
Video Input Source 1 PresentationSelection: Manual
Example:
Video Input Source [1..3] Visibility
Define the visibility of the video input source in the menus on the user interface.
Requires user role: ADMIN
Value space: <Never/Always/IfSignal>
Never: Set to Never when the input source is not expected to be used as a presentation
source.
Always: When set to Always, the menu selection for the video input source will always be
visible on the graphical user interface.
IfSignal: When set to IfSignal, the menu selection for the video input source will only be
visible when a presentation source is connected to the video input.
Video Input Source 1 Visibility: IfSignal
Example:
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
99
Administrator Guide
Setting passwords Appendices