Choosing A Ringtone - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set
Contents

Choosing a ringtone

You can choose from a set of predefined ringtones. The
chosen ringtone can be played back from this page.
Even if the web interface is used to initiate the
playback it is the video system that plays back the
ringtone; it is not the PC running the web interface.
D14908.06 SX20 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface Web interface
Navigate to: Configuration > Personalization : Ringtone tab
Choosing a ringtone
Choose a ringtone from the drop-down list,
and click Save
Playing back a ringtone
Click the play button ( ► ) to play back the
ringtone.
Use the stop button (  ) to end the playback.
You must save the ringtone before it
can be played back.
System settings
to make it the active ringtone.
29
Setting passwords
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices