Cisco TelePresence SX20 Quick Set Administrator's Manual page 107

Cisco TelePresence SX20 Quick Set
Contents
Video OSD AutoSelectPresentationSource
Determine if the presentation source should be automatically selected.
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable automatic selection of the presentation source.
On: Enable automatic selection of the presentation source.
Video OSD AutoSelectPresentationSource: Off
Example:
Video OSD CallSettingsSelection
In cases where you want to prevent users from easily changing the call settings from the
Settings menu, the call settings can be made available from within the Administrator Settings
menu. The administrator settings can be password protected. The OSD (On Screen Display)
is where you find the menus, dialogs, icons and indicators, and the navigation is done with a
remote control.
Requires user role: ADMIN
Value space: <Off/On>
Off: The call settings will be available from within the Conference settings in the
Administrator Settings.
On: The Call Settings menu will be available from the Settings menu.
Video OSD CallSettingsSelection: Off
Example:
Video OSD TodaysBookings
This setting can be used to display the system's bookings for today on the main on-screen
menu. This requires that the system is bookable by an external booking system, like for example
the Cisco TelePresence Management Suite (TMS).
Requires user role: ADMIN
Value space: <Off/On>
Off: Do not display todays bookings.
On: Displays information about this systems bookings on screen.
Video OSD TodaysBookings: Off
Example:
D14908.06 SX20 Administrator Guide TC7.0, DECEMBER 2013.
Introduction Web interface System settings System settings
Video OSD MyContactsExpanded
Set how the local contacts will be displayed in the phone book dialog on screen. The OSD (On
Screen Display) is where you find the menus, dialogs, icons and indicators, and the navigation is
done with a remote control.
Requires user role: ADMIN
Value space: <Off/On>
Off: The local contacts will be placed in a separate folder called MyContacts in the
phonebook dialog.
On: The local contacts in the phone book will be shown in the top level of the phonebook
dialog.
Video OSD MyContactsExpanded: Off
Example:
Video OSD Output
Define which monitor should display the on-screen menus, information and icons. The OSD (On
Screen Display) is where you find the menus, dialogs, icons and indicators, and the navigation is
done with a remote control.
Requires user role: ADMIN
Value space: <Auto/1/2>
Auto: The system will detect when a monitor is connected to the video output, and send the
OSD to the first monitor you connect. If you have a multi-monitor setup, and all monitors are
connected before switching on the system, the OSD will be sent to the video output with the
lowest numbering, starting on Video OSD Output 1. If the OSD does not show on the desired
monitor, disconnect all monitors and reconnect the monitors.
Range 1-2: If you want the OSD to be sent to one specific output, select 1 for HDMI output,
or select 2 for DVI-I output. Make sure you connect a monitor to the corresponding video
output connector.
Video OSD Output: Auto
Example:
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
107
Administrator Guide
Setting passwords Appendices