Turning On Power; Turning On The Power - Casio CASSIOPEIA FIVA MPC-701 Series User Manual

Lightweight and compact pen type computer
Table of Contents

Advertisement

Turning on Power

Either connect the FIVA unit to the power outlet by the AC adapter, or
attach a charged battery pack.

Turning on the power

Press the power switch until the PW indicator lamp lights.
Do not turn on and off in a short time. After turning power off, wait
for at least 10 seconds before turning it back on again.
The first time you turn on the power, you must perform a Windows
2000 operating system setup procedure.
Consult your original detailer for information about the setup
procedure.
You need to perform this procedure only once. After that, Windows
2000 operating system will boot up automatically when you turn on the
power.
• The screen goes through a number of changes and may even flicker
• FIVA's is equipped with "power management" functions that
If power does not turn on when you press the power switch, see the
troubleshooting guide on page 147.
36
while Windows 2000 operating system is starting up. This is
normal and does not indicate malfunction of FIVA.
automatically go into a low-power standby or hibernation mode if
you do not perform any screen touch or keyboard operation for
about 10* minutes. Input data on the screen when the low-power
Standby or Hibernation is entered is automatically saved, so the
screen reappears on the display when you recover from a low
power mode.
* You can change the trigger time setting using the Power
Management settings under Mobile Cockpit. See page 126.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cassiopeia fiva mpc-701m50eCassiopeia fiva mpc-701m30e

Table of Contents