Table of Contents
Advertisement
Display Problems
Symptom
Nothing on the display, Power indicator
lamp is not lit.
Display has gone blank.
Display contents are difficult to see.
Display is dim.
Password Problems
Symptom
The operator forget the Windows
password.
The operator forget the password
registered in the BIOS settings.
148
Recommended Action
Press the power switch to turn on power.
Touch anywhere on the display. FIVA's
power saving function causes the display
to go blank if no operation is performed
for some time. See page 126.
Reorient FIVA so you can view the
display at a different angle.
Use
+ "1" or
Fn
Fn
display brightness. If the display remains
dim at a bright setting, it may mean that it
has reached the end of its service life.
With your FIVA model number on hand,
contact your original dealer or authorized
distributor.
Check if the backlight switch is on. (M30E)
Recommended Action
Restore the system to its factory defaults.
With your FIVA model number on hand,
contact your original dealer or authorized
distributor.
+ "2" to adjust
Advertisement
Table of Contents
