Table of Contents
Advertisement
License
D20MX
Application Name
Group
Application
ID
B015
Bridgeman
B023
DNP V3.00 DCA
B034-0N
Redundant Monitor for
D20MX
B045-0
D20AC WESMAINT II+
Display Screens
B052-0N
DNP Internet Data Link for
D20MX
B058-0
IEC 870-5 Data Link
B060-0
IEC 870-5-101 DCA
B071-0
WESMAINT File Upload
B085
IEC Balanced Data Link
B086-0
IEC 60870-5-104 Data Link Provides a service to reliably transfer IEC 60870-5-101
B100-0
Internet Protocol Stack
B152-1N
IP Redundancy Monitor
DTA for D20MX
SAN0001 Application Definitions
B009
Mailbox DTA
B021N
DNP V3.00 DPA for D20MX The Distributed Network Protocol (DNP) DPA enables master
SAN0002 Application Definitions
B009
Mailbox DTA
B021N
DNP V3.00 DPA for D20MX The Distributed Network Protocol (DNP) DPA enables master
18
Description
Allows applications to communicate with other peer
applications. Automatically routing messages to the
destination application. Intended to work within layered
software architectures. Provides the routing functions of a
network layer, but does not add a network layer header to
outgoing messages.
The Distributed Network Protocol V3.00 DCA acts as the
master to one or more remote devices using the DNP V3.00
protocol.
Monitors CCU states and initiates failover. Also, receives
command requests to perform database synchronization,
switchover and failover.
Provides D20AC WESMAINT II+ displays.
DNP V3.00 data link over internet.
FT 1.2 primary data link configuration
Acts as a master (primary) communication device, initiating
data exchanges. It is capable of sending control commands
to the remote devices, and processing data autonomously
collected by the data link layer.
Uploads files via the WESMAINT port as S records or using
ZMODEM.
Provides services to send and receive messages using the
IEC 60870-5 FT 1.2 Balanced Protocol over point-to-point
links, with support for a dial-up modem. Works with one
user in point-to-point configurations, or multiple users in
dial-up configurations.
Application Service Data Units (ASDU) over a TCP/IP network.
Implements this service using the transport layer interface
protocol IEC 60870-5-104.
Configuration of the LAN
Provides health and active pseudo DI points for LAN Ports.
System point conversion application.
stations to retrieve and modify local data using the DNP
V3.00 Application Layer Protocol.
System point conversion application.
stations to retrieve and modify local data using the DNP
V3.00 Application Layer Protocol.
Table 3 provides the License Group legend.
Table 3: D20MX license group
LIcense Group
001
The license group is an option in the D20MX order code. Refer to Table 10 and Table 11 for
details. Ordering a D20MX with a particular license group option enables all applications in
that group to run on the D20MX.
Table 4 lists the embedded images included in the D20MX firmware.
Group Description
D2X Classic Applications
GE INFORMATION
CHAPTER 1: BEFORE YOU START
Application
Changed
Definition
Version
530
755
Yes
300
Yes
101
351
231
New
210
New
200
130
New
131
New
141
200
Yes
401
990
Yes
310
913
Yes
D20MX HARDWARE USER'S MANUAL
Advertisement
Table of Contents
