Using Basic Phone Functions
Putting a Call on Hold
Putting a Call on Hold
Resuming a Call
Ending a Call
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide
Using Mute
To mute the phone microphone, speaker, or headset microphone, press Mute. The
button lights red. Press Mute again to unmute.
To put an active call on hold, press the Hold button/Hold softkey. A series of beeps
or music on hold plays for the caller to indicate that the call is on hold.
To resume a call, press the (optionally configured) flashing red line button for the
call or press the Hold button or the Resume softkey. If you have multiple calls, all
calls are put on hold except the active call.
To end a call:
•
If you are using the handset, hang up or press the EndCall softkey.
•
If you are using the speakerphone, press Speaker.
•
If you are using the headset, either press the Headset button (wired) or
replace the receiver (wireless).
•
Press EndCall to hang up one call, and preserve another call. If necessary,
remove the call from hold by pressing the line button.
3
37