Cisco SPA525G User Manual page 6

Getting Started
Overview
Cisco Small Business SPA525G and SPA525G2 SPCP IP Phones User Guide
Setup of the phone network is typically performed by using Cisco Configuration
Assistant (CCA) software. This software is available on Cisco.com.
The phone can be powered by connecting your phone to an Ethernet switch that
provides Power over Ethernet (PoE) or you can use an optional Cisco PA100 power
adapter.
A phone is connected to the network through an Ethernet connection or the built-in
Wireless-G radio. If you are using the Wireless-G connection, a Cisco PA100
power adapter is required. The phone provides an additional Ethernet port that
allows a computer to be connected to the network through the phone. (We
recommend that if a PC is connected to the network through the phone, that the
phone be connected to the network only by using the wired Ethernet connection).
The Cisco Attendant Console has a 320 x 240 color, 3.2" inch screen and can
manage up to five telephone extensions. They also provide the following hardware
features:
• Two Ethernet 10/100 Mbps ports
• 802.3af Power over Ethernet support
• USB 2.0 host port
• AUX port (to attach a Cisco Attendant Console)
• Bluetooth capability for headset support
• Bluetooth capability for mobile phone pairing (Cisco SPA525G2 only)
• 2.5mm stereo earphone jack
1
5