Plug In The Machine And Switch On The Power; Foot Control Use - Kenmore 385. 17922 Owner's Manual

Plug in the Machine and Switch on the Power
F
NOTE :
Power supply plug
Power _
switch
Power
_" SUpply
Plug
connector
Machine
plug
Before inserting the plug into your
machine, be sure the power switch _s
OFF.
1. Check your outlet to be sure _t 3s a 110 to 120
Volt AC outlet.
2, Insert the machine plug into the three-prong
outlet, as shown. It wi]l only fit one way.
3. insert the power supply plug into the outlet.
Sewing light Light and
power switch
J
4. Push the light and power switch to turn
on the power and sewing light.
SAFETY FEATURE:
Your machine will not operate unless the
tight/power switch is turned on, tf you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children,
= Foot Control Use
The foot controf regulates the speed at
which you sew,
To increase speed, gently press down with
the bah of your foot.
To decrease speed, release your foot pres-
sure slight}y.
NOTE:
The foot control _s sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs,