To Remove; Additional Spool - Kenmore 385. 17922 Owner's Manual

To Remove the Bobbin from the Machine
_} Remove the cover plate by _ Take out the bobbin.
sliding the hook cover plate
release button to the right.
Horizontal Spooi Pin
Ordinary Spool
Smalt Spool
Tilt up the spool pin. Place the spool of
thread on the spool pin with the thread
comMg off the spool as shown,
Attach the large spool holder pressing it
firmly against the thread spool.
o The small spool holder is used with
narrow or small thread spools.
• Additional Spool Pin
The additional spool pin is used to wind
extra bobbins without unthreading the
machine.
To use, insert the additional spool pin in the
hole. Place the felt and the spool on the pin.
16