Horizontal Spool Pin; Bobbin Winding - Kenmore 385. 17922 Owner's Manual

= Bobbin Winding
Horizontal Spool Pin
,J
Additional Spool Pin
_) Pull the clutch knob away from the machine to disengage clutch.
(_) Draw the thread from the spool,
(_) Guide the thread around the bobbin winder thread guide.
_) Insert the thread through the hole in the bobbin, threading from the inside to the outside.
(_ Put the bobbin on the bobbin winding spindle, and push it to the right,
(_) With the free end of the thread held Jn your hand, depress the foot control.
(_ Stop the machine when it has made a few turns, and cut the thread close to the hole in the bobbin.
Depress the foot control again. When the bobbin is fully wound, it will stop automatically.
(_) Return the bobbin winder to its original position by moving the spindle to the left, and cut the
thread as shown.
(_) Push in the clutch knob to engage clutch,
]'he machine wilf not sew until the clutch knob is pushed in.
17