Straight; Overcast Stretch Stitching; Smocking; Stretch - Kenmore 385. 17922 Owner's Manual

• Overcast Stretch Stitching
Top thread tension
control 2 to 6
A: Zigzag foot
Set the Machine
Stitch width
controf 3 to 5
Stitch length
contro_ yellow
stretch stitch
posit=on
Stretch Stitch
The Stitch and Its Uses
This stitch can be used for sewing a
seam with an overcast finish,
The seam is formed and finished in
one operation. It can be used when
you are making swimwear, ski pants
and other garments that require
stretch.
Here's How
Place the raw edge of the fabric to
the LEFTof the needle as shown.
Stitch so the needle pierces the fabric
just short of the outside edge.
Or, place your fabric to allow a 5/8"
seam, then tnm seam aIIowance
after.
Raw or worn edges of older garments
can be overcast to prevent further
raveling.
NOTE: Usa a blue stretch fabric
needle, which effectively
prevents skipped stitches.
Smocking
Set the Machine
Stitch w*dth
Top thread tension
control 2 to 6
A: Zigzag foot
Stitch length
control ye]Jow
stretch stitch
posit_on
Stretch Stitch
With the stitch length at "4", sew
straight stitchtng lines 3/8" apart
across the area to be smocked.
Knot the threads along one edge. Pull
the bobbin threads and distribute the
gathers evenly. Secure the threads at
the other end. Sew the decorative
stitch between the gathering stitches.
Pull out the gathering stitches.
NOTE: Loosen the top thread
tension to make gathenng
easier.
5O