Dropping The Feed Dogs - Kenmore 385. 17922 Owner's Manual

o Dropplngthe Feed Dogs
j
_nlJ
The drop feed lever is located underneath the free arm bed on the
back side of the machine.
(_ To ra=se the feed dogs, push (_) For dropping the feed dogs,
the lever in the direction of push the lever in the direction
the arrow as illustrated, of the arrow as illustrated,
Then turn the handwheel.
* Feed dogs must always be up
for normal sew=ngo
= Darning
Top thread
tensloR
control
2to6
F, _ Satin stitch
foot
Set the Machine
Stitch width
control 0
Stitch length
control any number
_not necessary _o
ediust)
2
Stretch Stitch
Drop feed lever
1.
2.
3,
4,
5.
NOTE:
Drop the feed dogs,
Stretch the fabric with the hole in the center
between embroidery hoops, as show,
Lower the presser bar and sew at a slow
speed.
Move the fabric beck and forth slowly until
you have covered the darning area,
Turn the fabric 1/4 turn and sew another
layer of stitching over the first layer.
If your fabric is thin or badly damaged
use a separate piece of fabric under the
hole to reinforce it.
6, When you finish darning, return the pressure
dial to 3.
35