Table of Contents
Advertisement
Chapter 6
Setting Up Discovery and Device Management—CiscoWorks 1105/1130/1130-19
Step 2
Step 3
Step 4
Step 5
Enter HTTP Credentials for Non-IOS Access Points
Step 1
78-16345-01
To add an entry:
a.
Enter data in the individual text boxes: IP address, Read Community,
Timeout, SNMP Retries, and Write Community.
b.
Click Add to add the community string to the list.
Result: The community string appears in the list of entries.
To modify an entry:
Select the entry in the list of entries.
a.
Result: The individual text boxes are populated with the data from the entry.
Change the desired fields in the individual text boxes.
b.
Click Modify.
c.
The IP address field of an existing entry cannot be changed.
Note
To delete an entry:
Select the entry in the list of entries.
a.
Click Delete.
b.
Note
The default entry cannot be deleted.
Click Save to apply your changes.
HTTP credentials are required for downloading configuration files to non-IOS
access points and for uploading configuration from such access points. The same
password must be set on each access point, as described in
You can enter as many usernames and passwords as necessary.
To enter HTTP usernames and passwords:
Select Devices > Discover > Device Credentials > HTTP User/Password.
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
Adding Device Credentials to the WLSE
Table 5-1 on page
5-2.
6-3
Advertisement
Table of Contents
