NOTE:
Before operation, ensure Panel Lock is enabled.
To turn the secure receiving mode on:
1.
Press
until >SETUP appears, and then press
2.
Press
until >Admin Menu appears, and then press
3.
Press
until >Secure Settings appears, and then press
4.
Press
until >Secure Receive appears, and then press
5.
Press
until >Secure Receive Set appears, and then press
6.
Press
to select Enable , and then press
7.
Press
to select Change Password , and then press
8.
Enter a four-digit passcode you want to use, using the number keypad and press
NOTE:
When you set Secure Receive Set to Enable , 0000 is set by default.
9.
To return to the standby mode, press Cancel .
When a fax is received in the secure receiving mode, your multifunction printer stores it into memory
and the JOB STATUS screen displays "Secure Receive " to let you know that there is a fax stored.
To print received documents:
1.
Press
until >JOB STATUS appears, and then press
2.
Press
until >Secure Receive appears, and then press
3.
Enter the password, and then press
The faxes stored in memory are printed.
To turn the secure receiving mode off:
1.
Access the Secure Receive menu by following steps 1 to 5 in "To turn the secure receiving mode
on:".
2.
Press
to select Disable , and then press
3.
To return to the standby mode, press Cancel .
Printing Reports
.
.
.
.
.
.
.
.
.
.
.
.