Administrator Password
Confirm Administrator
Password
Security
Purpose:
To specify the settings for the SSL encryption communication to the multifunction printer.
Values:
HTTPS
Port Number
Time Zone
Generate Self-Signed
Certificate
1
*
Initial values may vary for different countries.
NOTE:
An optional multi-protocol card is required to display the Security page.
IPsec
Purpose:
To specify the Security Architecture settings for Internet Protocol (IPsec) for encrypted communication to the
printer.
Values:
Sets the password up to 10 alphanumeric characters. The password will
appear as asterisks (*) in the field when it is entered.
Enter the password again to confirm it.
Displays the port status.
Specifies the port number, which is not identical with that of HTTP for TCP/IP.
This must be 443 or between 8000 and 9999.
Set the correct Time Zone to generate SSL authorization. The initial value, 0 or
1
-5 (hours)*
, is set.
Click to display Generate Self-Signed Certificate page and to create a
security certification from the page.