Wireless Network; Wireless/Status - Dell 3115cn Color Laser Printer User Manual

Used when auto-detecting the PostScript communication protocol.
Auto*
Used when the communication protocol is in ASCII interface.
Standard
Used when the communication protocol is in binary format.
BCP
Used when the communication protocol supports both ASCII and binary data to switch between
TBCP
them according to the specified control code.
Used when no special processing is required for data.
Binary

Wireless Network

Use the Wireless Network menu to change print settings affecting jobs sent to the printer through a
wireless network.
NOTE: The Wireless Net menu is only displayed when an optional multi-protocol card is installed on
the printer and the optional wireless printer adapter is installed on the card.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.

Wireless/Status

Purpose:
To display the information on the wireless signal strength. Any change cannot be made on the operator
panel to improve the status of the wireless connection.
Values:
Indicates good signal strength.
Good
Indicates marginal signal strength.
Acceptable
Indicates insufficient signal strength.
Low
Indicates that no signal is received.
No Reception
Wireless/Reset Wireless