Determining The Wireless Network Settings - Dell 3115cn Color Laser Printer User Manual

To set up e-mail alerts:
1. Launch the Dell Printer Configuration Web Tool.
2. Click E-Mail Alert link.
3. Under Setup E-Mail Lists and Alerts, enter the Primary SMTP Gateway, the Reply Address, and enter
your email address or the key operator's email address in the email list box.
4. Click Apply New Settings.
NOTE: The SMTP server will display Connection in Progress until an error occurs.

Determining the Wireless Network Settings

You need to know the settings for the wireless network to set up the wireless printer. For details of the
settings, contact your network administrator.
Wireless SSID
Settings
Network
Type
Security Security
Settings
Transmit
Key
WEP Key
Pass
Phrase
NOTE: To set WPA2-PSK as security, select WPA-PSK AES.
Wireless Installation using USB connection
NOTE: The optional multi-protocol card with the Wireless LAN Adapter attached must be installed on
the multifunction printer.
Step 1. Install a multifunction printer to the already-operating wireless
network (When wireless setting is already set to your computer)
1. Insert the Drivers and Utilities CD into your computer.
2. The Drivers and Utilities CD should launch the installation software automatically.
If the CD does not automatically launch, click Start Run, type D:\Setup.exe (where D is the drive
Specifies the name that identifies the wireless network. Up to 32
alphanumeric characters.
Specifies the network type from Ad-hoc or Infrastructure.
Selects the security method from No security, WEP, WPA-PSK TKIP and WPA-
PSK AES.
Specifies the transmit key from the list.
Specified the WEP key set used through the wireless network only when WEP
is selected for Security.
Specifies the pass phrase of alphanumeric characters from 8 to 63 bytes
long only when WPA-PSK is selected for Encryption.