Adjusting Sleep Mode; Using Hibernate Mode - Dell B5465dnf Mono Laser Printer MFP User Manual

Saving money and the environment

Adjusting Sleep mode

To save energy, decrease the number of minutes before the printer enters Sleep mode.
Select from 1 to 120 minutes. The factory default setting is 30 minutes.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Timeouts.
3
In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep mode.
4
Click Submit.
Using the printer control panel
1
From the home screen, navigate to:
> Settings > General Settings > Timeouts > Sleep Mode
2
In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep mode,
and then touch Submit.

Using Hibernate mode

Hibernate is an ultra‑low‑power operating mode. When operating in Hibernate mode, the printer is essentially off, and
all other systems and devices are turned off safely.
Note: The Hibernate and Sleep modes can be scheduled.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > General Settings > Sleep Button Settings.
3
From the "Press Sleep Button" or "Press and Hold Sleep Button" drop‑down menu, select Hibernate.
4
Click Submit.
225