Remove Paper From Standard Output Bin; Replace All Originals If Restarting Job - Dell B5465dnf Mono Laser Printer MFP User Manual

Laser mfp
Hide thumbs Also See for B5465dnf Mono Laser Printer MFP:
Table of Contents

Advertisement

Troubleshooting
Remove defective disk [61]
Remove and replace the defective printer hard disk.
Remove packaging material, [area name]
Remove any remaining packaging material from the specified location.

Remove paper from standard output bin

Remove the paper stack from the standard bin.

Replace all originals if restarting job.

Try one or more of the following:
Touch Cancel job to clear the message and cancel the scan job.
Touch Scan from automatic feeder to continue scanning from the ADF immediately after the last successful scan
job.
Touch Scan from flatbed to continue scanning from the scanner immediately after the last successful scan job.
Touch Finish job without further scanning to end the last successful scan job.
Touch Restart job to restart the scan job with the same settings from the previous scan job.
Replace cartridge, 0 estimated pages remain [88.xy]
Replace the toner cartridge to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's Guide or
visit our Web site.
Replace cartridge, printer region mismatch [42.xy]
Install a suitable toner cartridge.
Replace imaging unit, 0 estimated pages remain [84.xy]
Replace the imaging unit to clear the message and continue printing. For more information, see the instruction sheet
that came with the supply or see the "Replacing supplies" section of the User's Guide.
Note: If you do not have a replacement imaging unit, then see the "Ordering supplies" section of the User's Guide or
visit our Web site.
273

Advertisement

Table of Contents
loading

Table of Contents