Input Select - Sharp Aquos LC-32G4U Operation Manual

Useful adjustment settings

Input Select

Selecting input source
Use this menu to select the input source.
1
Press INPUT.
• A list of selectable sources appears.
2
Press INPUT again to select the input source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1, Input 2 or 5 terminals.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Option".
3
Press a/b to select "Input Select", and then
press ENTER.
4
Press a/b to select a signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
NOTE
• If you set INPUT1 and INPUT2 to Auto, the system will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connectivity priority.
INPUT 1 and INPUT 2
1. COMPONENT VIDEO
2. VIDEO
68
Display
INPUT button
DVI input signal setting
1
Press INPUT to select INPUT5.
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5 INPUT5
CARD
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Option".
4
Press a/b to select "Input Select", and then
press ENTER.
[ Option ... Input Select ]
MENU
Option
Audio Only
Digital Noise Reduction
Input Select
Output Select
Quick Shoot
Center Channel Input
Caption Setup
5
Press a/b to select the equipment
connected to INPUT 5 terminal, and then
press ENTER.
[ Option ... Input Select ]
MENU
DIGITAL PC
ANALOG PC
DIGITAL AV
ANALOG AV
[Low]
[Auto]
[Fixed]
[Off]
[Off]