Basic adjustment settings
Power control
Power control setting allows you to save energy.
Power control for AV source
No signal off
When set to "Enable", the power will automatically shut
down if no signal inputs for 15 minutes.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power Control".
3
Press a/b to select "No Signal Off", and
then press ENTER.
[ Power Control ... No Signal Off ]
MENU
Power Control
No Signal Off
No Operation Off
4
Press c/d to select "Enable", and then
press ENTER.
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
• When a TV program finishes, and the AVC System receives
signal input, this function may not operate.
42
Setup
[Disable]
[Disable]
Disable
No operation off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Power Control".
3
Press a/b to select "No Operation Off", and
then press ENTER.
[ Power Control ... No Operation Off ]
MENU
Power Control
No Signal Off
No Operation Off
4
Press c/d to select "Enable", and then
press ENTER.
Enable
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• "Disable" is factory preset value.
Setup
[Disable]
[Disable]
Disable