Initial Setup - Sharp Aquos LC-32G4U Operation Manual

Watching TV

Initial setup

When you turn on the System for the first time, it will automatically memorize the broadcasting channels where
you live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 16.)
2. Connect the antenna cable to the AVC System. (See pages 20 to 22.)
3. Plug in the AC cord to the AC outlet. (See page 23.)
Language setting
Select from among 3 languages: English, French and
Spanish.
1
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Language
Air/Cable
CH Search
Antenna setting
Make sure what kind of connection is made with your System
when selecting "Air" or "Cable" for both ANT-A and B.
2
Press c/d to select "Air" or "Cable" for ANT-
A, then press a/b to move down.
Press c/d to select "Air" or "Cable" for ANT-
B.
Press ENTER to enter the setting.
• This operation makes the System search for
both ANT-A and B.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one
matches to your system. Select Auto when you
do not know which one to select.
Language
Air/Cable
CH Search
Language
Air/Cable
CH Search
English
Français
Español
Example
ANT-A Air
ANT-B Cable (Auto)
ANT-A Air
ANT-B Cable (Auto)
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
3
Press c/d to select "Yes" for ANT-A, then
press a/b to move down.
Press c/d to select "Yes" for ANT-B, then
press a/b to move down to select "Search
Start" , and press ENTER.
Language
Air/Cable
CH Search
CH Search
ANT-A Air
CH Search
ANT-B Cable
ANT-A
NOTE
• Make sure what kind of connection is made with your
System when selecting "Air" or "Cable" for both ANT-A
and B.
• If no channel is found, make sure what kind of connection
is made with your System and try EZ setup again (see
page 30).
ANT-A Yes No
ANT-B Yes No
Search Start
Example
[ 25 ] Found [ 20 ]
[ 25 ] Found [ 20 ]
Air
2
Audio : MONO
25