Settings when using external devices
Settings when using HDMI output devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certifi ed cable. When you want to output
the audio and picture from an HDMI output device on the TV, select "INPUT3" or "INPUT4" by switching the input
source.
nnecting an HDMI output device
Co
HDMI output
device
H HDMI (High-Defi nition Multimedia Interface)
terminal selection
To watch an HDMI equipment image, select
1
"INPUT3" or "INPUT4" using direct key IN3
(HDMI), IN4 (HDMI), TV/VIDEO on the
remote control unit or TV/VIDEO on the TV.
Press MENU and the MENU screen displays.
2
Press c / d to select "Option".
3
Press a / b to select "HDMI Setup", and then
4
press ENTER.
• The HDMI Setup can be selected only when
"INPUT3" or "INPUT4" is selected.
[ Option ... HDMI Setup ]
MENU
Option
AQUOS LINK Setup
DNR
Input Select
Output Volume Select
Audio Only
Game Play Time
Colour System
HDMI Setup
Fine Sync.
Press a / b to select the desired item, and
5
then press ENTER.
32A33X_en_f.indd 37
32A33X_en_f.indd 37
HDMI cable (commercially available)
HDMI Setup
items
Auto View
Audio
Select
NOTE
• Refer to your external equipment operation manual for the
above settings.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
• "Audio Select" is only available for INPUT3.
Selectable
Description
items
Enable/
Set whether or not to use
Disable
WIDE MODE based on
signal recognition, including
an HDMI signal.
Digital/
Select "Digital" for audio
Analogue
signal via the HDMI terminal.
Select "Analogue" for audio
signal via the AUDIO jack.
37
2008-1-4 20:15:53
2008-1-4 20:15:53