Channel Setup - Sharp Aquos LC-32G4U Operation Manual

Basic adjustment settings

Channel setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "CH Setup", and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 81 for
setting a secret number.
Air/Cable
CH Search
CH Memory
4
Press a/b to select "Air/Cable", and then
press ENTER.
5
Press c/d to select "Air" or "Cable" for ANT-
A, then press a/b to move down.
Press c/d to select "Air" or "Cable" for ANT-
B.
Press ENTER to enter the setting.
Air/Cable
CH Search
CH Memory
NOTE
• Make sure what kind of connection is made with your
System when selecting "Air" or "Cable" for both ANT-A
and B.
• There are 3 kinds of CATV system, including Standard,
HRC and IRC. Select the one matches to your system.
Select Auto when you do not know which one to select.
ANT-A Air
ANT-B Air
Example
ANT-A Air
ANT-B Cable (Auto)
Channel search
Channel auto search makes the System look for all
channels viewable in the set area.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "CH Setup", and then
press ENTER.
• If you already set the Secret No., input the 4-
digit secret number here. See page 81 for
setting a secret number.
4
Press a/b to select "CH Search", and then
press ENTER.
5
Press c/d to select "Yes" for ANT-A, then
press a/b to move down.
Press c/d to select "Yes" for ANT-B, then
press a/b to move down to select "Search
Start" , and press ENTER.
Air/Cable
CH Search
CH Memory
Example: CH Search
[ Setup ... EZ Setup ... CH Search ]
MENU
ANT-A Air
[ Setup ... EZ Setup ... CH Search ]
MENU
ANT-B Cable
NOTE
• Make sure what kind of connection is made with your
System.
ANT-A Yes No
ANT-B Yes No
Search Start
[ 25 ] Found [ 20 ]
[ 2 ] Found [ 20 ]
31