Esc Ixx1 Retrieve Default Character Size; Esc Ix32 Specify Default Line Feed - Brother RJ-4030 Software Manual

ESC iXX1 Retrieve default character size

ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n1: 00h (Fixed)
n2: 00h (Fixed)
Description
The default character size setting is returned as 4-byte data.
[1] 02h (Fixed)
[2] 00h (Fixed)
[3, 4] n3 n4 settings
n3+(n4*256): Default character size (dots)
The retrieved value is a value specified by a static command.
ESC iX32 Specify default line feed
ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n1: 02h (Fixed)
n2: 00h (Fixed)
00h≤n3≤FFh, 00h≤n4≤04h
Description
Specifies the default line feed.
n3+(n4*256): Default line feed (dots) (0 through 1275)
*The manufacturer's default is 32.
This command is a static command.
Remarks
Invalid if the setting is a value outside of the allowable range
i X X 1
105 88 88 49
69 58 58 31
i X 3 2
105 88 51 50
69 58 33 32
- 92 -
n1 n2
n1 n2
n1 n2
n1 n2 n3 n4
n1 n2 n3 n4
n1 n2 n3 n4
ESC/P Command Reference
5. Control Command Details