Esc P Specify Proportional Characters; Esc W Specify Double-Width Characters - Brother RJ-4030 Software Manual

ESC p Specify proportional characters
ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n=0, 1, 48 ("0"), 49 ("1")
Description
Specifies proportional characters.
n=1 or 49 ("1"): Specifies proportional characters.
n=0 or 48 ("0"): Cancels proportional characters.
If proportional characters are specified, the character spacing specified with ESC SP is maintained as is.
ESC W Specify double-width characters
ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n=0, 1 or 48 ("0"), 49 ("1")
Description
Specifies double-width characters.
n=1 or 49 ("1"): Specifies double-width characters.
n=0 or 48 ("0"): Cancels double-width characters.
Double-width characters specified with this command are not canceled with the DC4 or FS DC4 code or a
line feed.
Canceling double-width characters also cancels compressed (half-width) characters.
Example
Code: ABC ESC W 1 ABC ESC W 0 ABC FF
Print result: ABCABCABC
p n
112 n
70 n
W n
87 n
57 n
- 28 -
ESC/P Command Reference
5. Control Command Details