Esc I V; Barcode (Pdf417); Esc I V 2D Barcode (Pdf417) - Brother RJ-4030 Software Manual

ESC i V

2D barcode (PDF417)
ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Format: ESC
Parameters
(1) [Parameters]
Unlike with 1D barcodes, all parameters must be specified in order, starting from the top.
If a value other than those listed is entered for a parameter, that parameter is specified with its default
value.
1. Cell size
2. Symbol type
3. Data input
method
4. Error
correction
capacity-type
5. Error correction capacity-value
- Level input
- Percentage
input
6. Symbol size
(X direction)
7. Symbol size
(Y direction)
i V or v
105 86 or 118
69 56 or 76
i V or v
[1-byte decimal] 1
[1-byte decimal] 2
[1-byte decimal] 3
[1-byte decimal] 4
[1-byte decimal] 5
[1-byte decimal] 6
[1-byte decimal] 8
[1-byte decimal] 10
[1-byte decimal] 0
[1-byte decimal] 1
[1-byte decimal] 2
[1-byte decimal] 3
[1-byte decimal] 0
[1-byte decimal] 1
[1-byte decimal] 0
[1-byte decimal] 1
[2-byte decimal] 0–8
[2-byte decimal] 0–400
[1-byte decimal] 0
[1-byte decimal] 1–30
*0 and 1–4 with MicroPDF417
[1-byte decimal] 0
[1-byte decimal] 3–90
*0 and 4–44 with MicroPDF417
Data
Data
Data
[Parameters] [Barcode data]
(1) (2)
Specifies the dot size per cell side.
Prints 1 dot per cell side.
Prints 2 dots per cell side.
Prints 3 dots per cell side. (default value)
Prints 4 dots per cell side.
Prints 5 dots per cell side.
Prints 6 dots per cell side.
Prints 8 dots per cell side.
Prints 10 dots per cell side.
Standard (default value)
Truncate
MicroPDF417 standard
MicroPDF417 Code128 emulation
Auto input (default value)
Binary input
Level input setting
Percentage input setting
Specifies the level.
(The default value is 0.)
Specifies the percentage.
(The default value is 10.)
Auto setting (default value)
Manual settings
Auto setting (default value)
Manual settings
- 70 -
ESC/P Command Reference
\\\
(3)
(default value)
5. Control Command Details