Esc Ixm2 Select Default Character Code Set; Esc Ixm1 Retrieve Default Character Code Set - Brother RJ-4030 Software Manual

ESC iXm2 Select default character code set

ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n1: 01h (Fixed)
n2: 00h (Fixed)
n3: 00h, 01h, 02h
Description
Selects the default character code set.
n3=00h: Standard character code set (*Manufacturer's default)
n3=01h: Eastern European character code set
n3=02h: Western European character code set
This command is a static command.
Remarks
Invalid if n3 is a value outside of the allowable range

ESC iXm1 Retrieve default character code set

ASCII: ESC
Decimal: 27
Hexadecimal: 1B
Parameters
n1: 00h (Fixed)
n2: 00h (Fixed)
Description
The default character code set setting is returned as 3-byte data.
[1] 01h (Fixed)
[2] 00h (Fixed)
[3] Setting
00h: Standard character code set
01h: Eastern European character code set
02h: Western European character code set
The retrieved value is a value specified by a static command.
i X m 2
105 88 109 50
69 58 6D 32
i X m 1
105 88 109 49
69 58 6D 31
- 99 -
n1 n2 n3
n1 n2 n3
n1 n2 n3
n1 n2
n1 n2
n1 n2
ESC/P Command Reference
5. Control Command Details