2. Examples of Using ESC/P Commands
This is the label that will be made.
Step 1:
Landscape
Step 3:
Horizontal position
In order to make this label, the following six steps are required after entering ESC/P mode.
Step 1: Select the landscape orientation.
4 inches
1.8 inches
1 inch
- 5 -
Step 2:
Page length
Step 4:
Vertical position
Step 5:
Font type:
(proportional pitch)
Step 6:
Character size:
Entered command
ESC i L 01h
2. Examples of Using ESC/P Commands
ESC/P Command Reference
Helsinki
100 dots
nL