ESC i a
Switch command mode
ASCII:
ESC
Decimal:
27
Hexadecimal: 1B
Parameters
n:
Command mode
0 or 48: ESC/P standard mode
1 or 49: Raster graphics mode
3 or 51: P-touch Template mode
Description
Switches the command mode to ESC/P, P-touch Template or PTCBP (raster graphics) mode.
Dynamically switches between the three modes.
Since this is a dynamic command, after the printer is turned off and on again, the setting returns to the
previously setting.
i
a
n
105
97
n
69
61
n
- 82 -
ESC/P Command Reference
5. Control Command Details