Sending Documents Via Internet Relay; To A Location That Has A Pre-Programmed Relay Station - Panasonic DP-2000 Operating Instructions Manual

Relayed Transmission

Sending Documents via Internet Relay

Once you have recorded all the necessary parameters in your machine, you can send a document to one or
multiple G3 fax machines automatically through the Internet Relay Station by using the procedure described
below. The Internet Relay Station must have all the necessary parameters setup.

To a Location That Has a Pre-programmed Relay Station

1
a
or
1
b
Place a book or an original face down on the Platen
Glass.
2
Enter only the telephone number(s) of the End Receiving
Station(s) using any combination of the following methods:
• One-Touch Dialing
• Abbreviated Dialing
• Manual Number Dialing (up to 70 stations), press
SET
• Directory Search Dialing, press
station is entered (For details, see pages 62 to 66.)
Ex:
Continued on the next page...
Place original(s) face up on the ADF.
after each station is entered. (see Note)
SET
NETWORK FEATURE
ENTER STATION(S)
THEN PRESS START 00%
<02> STOCKHOLM
4681111234
after each
109