Thermostat Information; Outdoor Temperature Sensor (Select Models) - Honeywell T8602C Chronotherm IV Installation Instructions Manual

T8602C CHRONOTHERM

THERMOSTAT INFORMATION

1. Press the Time ∆ key to access the thermostat
information.
2. Press the increase
date code. The first two large digits are the month
and the third digit is the last digit of the year.
(Example: 027 = February 1997).
3. Press the increase
ware identification code.
(Example: 02 = software ID code 2).
69-1670
®
IV DELUXE PROGRAMMABLE THERMOSTATS
M14613
key to display the production
M14614
key again to display the soft-
M14615
4. Press the increase
ware revision number.
(Example: 001 = Revision number 1).
5. Press the increase
EEPROM identification code.
(Example: 314 = EEPROM ID 314).
6. Press the Run Program key to exit the System
Test. The System Test times out after four minutes
without any key presses.
CHECKOUT
Outdoor Temperature Sensor
(Select Models)
Allow the outdoor temperature sensor to absorb the
outdoor air for a minimum of five minutes before taking a
reading.
10
key again to display the soft-
M14616
key again to display the
M14617