Thermostat Information; Outdoor Temperature Sensor (Select Models) - Honeywell T8601D Installation Manual

T8601D CHRONOTHERM

THERMOSTAT INFORMATION

1. Press the Time ∆ key to access the thermostat
information.
2. Press the increase s key to display the production
date code. The first two large digits are the month
and the third digit is the last digit of the year.
(Example: 027 = February 1997).
3. Press the increase s key again to display the soft-
ware identification code. (Example: 02 = software
ID code 2).
69-1413—2
®
IV DELUXE ZONE THERMOSTATS
4. Press the increase s key again to display the soft-
ware revision number. (Example: 001 = Revision
number 1).
5. Press the increase s key again to display the
EEPROM identification code. (Example: 314 =
M14613
EEPROM ID 314).
6. Press the Run Program key to exit the system test.
The system test times out after four minutes
without any key presses.
M14614
CHECKOUT
Outdoor Temperature Sensor
(Select Models)
Allow the outdoor temperature sensor to absorb the
outdoor air for a minimum of five minutes before taking a
reading.
M14615
10
M14616
M14617