Thermostat Information - Honeywell Tradeline Chronotherm IV Installation Instructions Manual

T8611G CHRONOTHERM
Refer to Table 5 for the directions and results of the
specific tests.
Key to Test
Press Number
Heating Equipment System-Test
Time 10
11
12
11
10
Emergency Heating Equipment System-Test
Time 20
21
20
Cooling Equipment System-Test
Time 30
31
30
Fan Equipment System-Test
Time 40
41
40
Key Operation System-Test
Time
60 2
NOTE: Press any key and the displayed numbers will
change. Press Time
and the Time
Program Key will not exit this test. To exit, press
Time or Time
key.

THERMOSTAT INFORMATION

1. Press the Time
information.
2. Press the increase
date code. The first two large digits are the month
and the third digit is the last digit of the year
(Example: 027=February 1997).
69-0936—1
®
IV DELUXE PROGRAMMABLE HEAT PUMP THERMOSTATS
Table 5. Installer System-Test Options.
Enter heating equipment system-test.
Stage-one heat comes on. The system fan is also energized.
Stage-two heat comes on. Stage-one heat and system fan remain on.
Stage-two heat turns off.
Stage-one heat and system fan turn off.
Change from heating to emergency heating equipment system-test.
Emergency heat come on.
Emergency heat turn off.
Change from heating or emergency heating to cooling equipment system-test.
Cool and system fan come on.
Cool and system fan turn off.
Change from cooling to fan equipment system-test.
Fan comes on.
Fan turns off.
Change from fan to key operation system-test.
to go to the previous test
to go to the next test. The Run
and then the Run Program
key to access the thermostat
M4934
key to display the production
M10351
NOTE: Press Time
Time to go back to the previous test. Press
Run Program to exit the system-test.
Description
3. Press the increase
software identification code. (Example: 02 =
software ID code 2)
4. Press the increase
software revision number (Example: 001=Revision
number 1).
5. Press the increase
EEPROM identification code. (Example: 314 =
EEPROM ID 314)
8
to advance to the next test and
key again to display the
M4932A
key again to display the
M10229
key again to display the
M4933A