Thermostat Information; Outdoor Temperature Sensor (Select Models); Troubleshooting Guide - Honeywell Chronotherm T8601D Installation Instructions Manual

T8601D CHRONOTHERM® IV DELUXE PROGRAMMABLE THERMOSTATS
Table 5. Installer Self-Test Options.
Key to Test
Press Number
Cooling Equipment System Test
Time 30 Change from heating to cooling
equipment system test
31 Cool and system fan come on
30 Cool and system fan turn off
Fan Equipment System Test
Time 40 Change from cooling to fan
equipment system test
41 Fan comes on
40 Fan turns off
Key Equipment System Test
Time 60 Change from fan to key operation
system test
NOTE: Press any key and the displayed numbers
change. Press Time
and Time to go to the next test. The Run Pro-
gram key does not exit this test. Press Time
or Time and then the Run Program key to
exit.

THERMOSTAT INFORMATION

1. Press the Time
information.
2. Press the increase
date code. The first two large digits are the month
and the third digit is the last digit of the year (Exam-
ple: 027=February 1997).
3. Press the increase
ware identification code. (Example: 02 = software
ID code 2).
69-1626
Description
to go to the previous test
key to access the thermostat
key to display the production
key again to display the soft-
4. Press the increase
ware revision number (Example: 001=Revision
number 1).
5. Press the increase
EEPROM identification code. (Example: 314 =
EEPROM ID 314).
6. Press the Run Program key to exit the self-test.
The self-test times out after four minutes without
any key presses.
CHECKOUT
Outdoor Temperature Sensor
(select models)
Allow the outdoor temperature sensor to soak in the
outdoor air for a minimum of five minutes before taking a
reading.

TROUBLESHOOTING GUIDE

Refer to Table 6 for troubleshooting information.
M14615
8
key again to display the soft-
key again to display the
M14616
M14617