Mounting To Shop Floor - Grizzly G0708 Owner's Manual

Mounting to Shop
Floor
Bolting to Concrete Floors
Figure 4
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Using Machine Mounts
Figure 4
We strongly recommend securing your
machine to the floor if it is hardwired to the
power source. Consult with your electrician
to ensure compliance with local codes.
Figure 5
NOTICE
Figure 5