Section 3: Setup - Grizzly G5354 Instruction Manual

Inventory
Your airbrush left our warehouse in a care-
fully packed box. If you discover the air-
brush is damaged after you have signed for
delivery, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing materi-
als for possible inspection by the carrier or
its agent. Otherwise, filing a freight claim
can be difficult.
After you have unpacked the carton you
should find the following:
Model G5354 Inventory (Figure 1)
A. Glass Jar w/Enclosed Lid .................. 1
B. Glass Jar w/Suction Lid ..................... 1
C. Air Hose ............................................. 1
D. Airbrush .............................................. 1
E. Airbrush Hanger ................................. 1
F. Metal Jar ............................................ 1
G. Adapter .............................................. 1
H. Nozzle Tip Wrench 2mm ................... 1
I. Eyedropper ........................................ 1
A
C
D
F
Figure 1. Model G5354 inventory.
Model G5354 Airbrush

SECTION 3: SETUP

B
E
H
G
I
Assembly
Prior to assembly and use of the air-
brush, it is essential that all parts be thor-
oughly cleaned and dried. Please refer to
Cleaning in the MAINTENANCE section
on Page 11 for more detailed instructions.
During assembly, make sure all connec-
tions are tight enough to prevent air leaks
but not so tight as to cause damage.
To assemble the airbrush:
1. Attach one end of the air hose to the
airbrush body, as shown in Figure 2.
Figure 2. Air hose attached to airbrush.
2. Attach the adapter to the air hose, as
shown in Figure 3.
Figure 3. Adapter attached to air hose.
-7
-