Grizzly G0532 Owner's Manual

Grizzly G0532 Owner's Manual

2hp dry spray booth
Hide thumbs Also See for G0532:

Advertisement

Quick Links

MODEL G0532
2HP DRY SPRAY BOOTH
OWNER'S MANUAL
COPYRIGHT © DECEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC. REVISED APRIL, 2007 (BL)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL5690 PRINTED IN TAIWAN

Advertisement

Table of Contents
loading

Summary of Contents for Grizzly G0532

  • Page 1 2HP DRY SPRAY BOOTH OWNER'S MANUAL COPYRIGHT © DECEMBER, 2005 BY GRIZZLY INDUSTRIAL, INC. REVISED APRIL, 2007 (BL) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
  • Page 2 The machine owner MUST maintain the original label location and readability. If a label is removed or becomes unreadable, REPLACE the label before using the machine. For new labels, contact Grizzly Industrial Inc. at (570) 546-9663 or techsupport@grizzly.com.
  • Page 3: Table Of Contents

    INTRODUCTION ... 2 Foreword ... 2 Contact Info ... 2 Data Sheet ... 3 Identification ... 5 SECTION 1: SAFETY... 6 Safety Instructions for Machinery ... 6 Additional Safety Instructions for Dry Spray Booths ... 8 SECTION 2: CIRCUIT REQUIREMENTS ... 9 SECTION 3: SET UP ...
  • Page 4: Introduction

    INTRODUCTION Foreword We are proud to offer the Model G0532 2HP Dry Spray Booth. This machine is part of a grow- ing Grizzly family of fine machinery. When used according to the guidelines set forth in this manu- al, you can expect years of trouble-free, enjoyable operation and proof of Grizzly’s commitment to...
  • Page 5: Data Sheet

    ������������������������������������������������������������������������������������������������������������������������������������������������ ���������� � ����������������������������������������������������������������������������������������������������������������������������������������������� ��������� � �������������������������������������������������������������������������������������������������������������������������������������������������������� � � ������������������������������������������������������������������������������������������������������������������������������������������� ���������� � �������������������������������������������������������������������������������������������������������������������������������������������� ���������� � ������������������������������������������������������������������������������������������������������������������������������������������� ��������� � ����������������������������������������������������������������������������������������������������������������������������������������������������������� � � ���������������������������������������������������������������������������������������������������������������������������������������������� ���������� � ����������������������������������������������������������������������������������������������������������������������������������������������� ���������� � ���������������������������������������������������������������������������������������������������������������������������������������������� ��������� � G0532 2HP Dry Spray Booth Data Sheet ������� ���� �����...
  • Page 6 ������������������������������������������������������������������������������������������������������������������������������������������������ ������������� ����� ��������������� � ������������ � �������������������������������������������������������������������������������������������������������������������������������������������������� �������� � ���������������������������������������������������������������������������������������������������������������������������������������������������������������������� � ��������� � ������������������������������������������������������������������������������������������������������������������������������������������������������������������ � ��������������������������������������������������������������������������������������������������������������������� ���������������������������� � �������������������������������������������������������������������������������������������������������������������������������������������������������� ����������� ��������� � ������������������� � ��������������������� � ���������������� � ��������� � ����������������� � ������������������������������ � ������ G0532 2HP Dry Spray Booth...
  • Page 7: Identification

    G0532 2HP Dry Spray Booth...
  • Page 8: Section 1: Safety

    Wear protective hair covering to con- tain long hair and wear non-slip footwear. 6. NEVER OPERATE MACHINERY WHEN TIRED, OR UNDER THE INFLUENCE OF OPERATING DRUGS OR ALCOHOL. Be mentally alert at all times when running machinery. OPERATING MACHINERY. G0532 2HP Dry Spray Booth...
  • Page 9 16. MAKE SURE GUARDS ARE IN PLACE AND WORK CORRECTLY BEFORE USING MACHINERY. G0532 2HP Dry Spray Booth 17. REMOVE WRENCHES. Make a habit of checking for keys and adjusting wrenches before turn- ing machinery ON.
  • Page 10: Additional Safety Instructions For Dry Spray Booths

    Like all machines there is danger associ- ated with the Model G0532. Accidents are frequently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to lessen the pos- sibility of operator injury.
  • Page 11: Section 2: Circuit Requirements

    NFPA 33 and NEC 2005. It is the customer's responsibility to install wiring and a switch in the G0532. Because of the fire/ explosion hazard potential of spray booths, you MUST have a qualified electrician connect the...
  • Page 12: Section 3: Set Up

    Switch and Wiring ...(As per NFPA 33 and NEC regulations) Unpacking The Model G0532 was carefully packed when it left our warehouse. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice.
  • Page 13: Inventory

    S. Curtain Braces (Not Shown) ... 2 NOTICE: Some parts listed in the inventory may already be installed on the machine. Check the machine before assuming parts are missing. G0532 2HP Dry Spray Booth Hardware and Tools (Not Shown) • Hex Bolts • Flat Washers •...
  • Page 14: Hardware Recognition Chart

    Hardware Recognition Chart -12- G0532 2HP Dry Spray Booth...
  • Page 15: Site Considerations

    DO NOT allow unsupervised children or visitors in your shop at any time! G0532 2HP Dry Spray Booth Components and Hardware Needed: Qty Leg Support (Long) ... 2 Leg Support (Short) ... 2 Leg ... 4 Exhaust Fan ...
  • Page 16: Skew Boards

    "-18 ... 9 ⁄ "-20 x ⁄ " ... 24 ⁄ " ... 72 ⁄ "-20 ... 48 ⁄ "-20 x ⁄ " ... 24 ⁄ " ⁄ " hex bolts, Right Skew Board G0532 2HP Dry Spray Booth ⁄ "...
  • Page 17 Step 4, four flat wash- ers, and two hex nuts. G0532 2HP Dry Spray Booth Fasten a large brace over the seam of the right and upper skew boards (Figure 10), using six ers and six hex nuts.
  • Page 18: Work Table

    ⁄ "-20 x Figure 14. Installing left curtain. Figure 13. Installing table. Curtains ⁄ " ...8 ⁄ "-20 ...8 ⁄ "-20 x ⁄ " ...8 ⁄ " -20 x ⁄ " flat head screws, four G0532 2HP Dry Spray Booth...
  • Page 19: Filters

    Figure 16. Figure 16. Second stage filters. G0532 2HP Dry Spray Booth Install the four first stage air filters on the outer rail as shown in Figure 17.
  • Page 20: Exhaust Fan Outlet

    Lock the latches on the bottom of each cur- tain into the work table, as shown in Figure ⁄ "-18 Outlet Gasket Exhaust Fan Figure 20. Locking curtain latches. Adjustments G0532 2HP Dry Spray Booth...
  • Page 21: Ducting

    Install a tubing connector fitting in the larger pre-drilled hole on the side of the booth near the manometer as shown in Figure 22. G0532 2HP Dry Spray Booth Run tubing from the low pressure side (-) of the manometer to the tubing connector fitting as shown in Figure 22.
  • Page 22: Section 4: Operations

    Check to make sure the manometer body is level. Adjust as needed. Rotate the zero adjustment knob counter- clockwise (Figure 24) until it stops, then turn it clockwise three turns. Figure 24. Air filter indicator controls. G0532 2HP Dry Spray Booth...
  • Page 23 New Filter Indicator Mark Figure 25. New filter installation mark example. G0532 2HP Dry Spray Booth Multiply the reading from Step 6 times 2 (2x) and mark with the supplied red arrow (Figure 26). This is the dirty filter indicator mark.
  • Page 24: Section 5: Maintenance

    Or place them in a water-filled metal container to prevent a fire hazard. Disposal varies depending on the type of paint being captured. Consult local authorities for storage and disposal recommendations. G0532 2HP Dry Spray Booth red gauge oil. ®...
  • Page 25: Section 6: Service

    Spray Booth Operations SYMPTOM Too little airflow in booth. Too much airflow in booth. The filter indicator does not work prop- erly. G0532 2HP Dry Spray Booth About Service Troubleshooting POSSIBLE CAUSE 1. Paint build-up on exhaust fan blades or exhaust duct.
  • Page 26: 115V Wiring Diagram

    115V Wiring Diagram ����� -24- �� �� �� �� �� �� ���� � ��������� ����������� ������� ������ ��������� �� ���� ��� ���� ��� ����� ������������ ���������� ����� ���� ����� ������ ���� ������� ����� ������ ������� G0532 2HP Dry Spray Booth...
  • Page 27: 230V Wiring Diagram

    230V Wiring Diagram ����� G0532 2HP Dry Spray Booth �� �� �� ���� � ��������� ����������� ������� ������ ��������� �� ���� ��� ���� ��� ����� ������������ ���������� ����� ���� ����� �� �� �� ������ ���� ������ ����� ������ ������ -25-...
  • Page 28: Parts Breakdown

    Parts Breakdown -26- G0532 2HP Dry Spray Booth...
  • Page 29: Parts List

    REAR RIGHT LEG P0532016 FRONT RIGHT LEG P0532017 SHORT LEG SUPPORT P0532018 LONG LEG SUPPORT P0532019 UPPER SKEW BOARD G0532 2HP Dry Spray Booth Parts List REF PART # DESCRIPTION PB07 HEX BOLT 5/16-18 x 3/4 PW07 FLAT WASHER 5/16 PN02...
  • Page 30: Safety Label Placement And Parts List

    The machine owner MUST maintain the original label location and readability. If a label is removed or becomes unreadable, REPLACE the label before using the machine. For new labels, contact Grizzly Industrial Inc. at (570) 546-9663 or PART #...
  • Page 31: Warranty And Returns

    WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
  • Page 32 -30- G0532 2HP Dry Spray Booth...
  • Page 33 Do you think your machine represents a good value? Would you recommend Grizzly Industrial to a friend? Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times.
  • Page 34 FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE Place Stamp Here...
  • Page 36 Buy Direct and Save with Grizzly Visit Our Website Today And Discover Why • • • – Trusted, Proven and a Great Value! ® Grizzly Is The Industry Leader! ® SECURE ORDERING ORDERS SHIPPED WITHIN 24 HOURS E-MAIL RESPONSE WITHIN ONE HOUR...

Table of Contents