5.
Be sure to install the lamp cover by re-engaging
the two clips and slide to the right. Then tighten the screw of
the lamp cover before turning
the power on, otherwise
it may cause unusual
colors.
If the lamp cover is not
installed
and you try to turn ON the TV ,the power will be off and the Lamp Indicator will flash (see page 9).
Place back in the LAMP COVER
_
li._.LA M
P COVER
then slide to the right
SCREW
Turn clockwise to tighten the tamp cover screw.
6. Plug power cord into AC outlet and turn on the main power switch.
120V
t
____1
59