Remote Control Battery; Installation - Hitachi 62VS69 Operating Manual

Check to make sureyouhave thefollowing a ccessories before disposing o f thepacking material.
O Remote Control
©00©
IN£U fs ASPECI PI_ OAY,NIGH f
0000
,,s,© 6
®®®
®@@
©@@
0@©
®®®®
®®
Two "AA" size,
1.5V batteries
For US models: For optional accessories,
please access our website at
www.hitachi.us/tv
Remote Control Unit CLU-4351UG2 (Part No. HL02072).
O Two "AA" size, 1.5V batteries (For Remote Control Unit).
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
1.
2.
3.
4.
Open the battery cover of the remote control by pushing down and sliding the back cover oft.
Insert two new "AA" size batteries for the remote controk When replacing old batteries, push them towards the
springs and lift them out.
Match the batteries to the (+) and (-) marks in the battery
compartment.
Insert the bottom of the battery, the (-) side, into the battery
compartment first, push towards the springs and insert the
top of the battery, the (+) side, into place. Do not force the
battery into the battery compartment.
Replace the cover.
Bottom View (Remote Control)
0
Lift up on tab to remove back cover.