Hitachi 62VS69 Operating Manual page 49

Set Event Timer
This function will automatically operate the Projection
TV viewing reservation of a program. If the clock is not
set, you can not use this function and the screen below
will appear. The message on the screen will disappear
after 3 seconds, then the screen automatically goes to
the clock setup mode (see page 47).
1,
2,
3,
4,
5,
6,
Use the CURSOR buttons • or • to highlight
EVENT 1, EVENT 2, EVENT 3, EVENT 4 and then
press the SELECT button to select. A [_' in the
box means the selected event is enabled.
Use the CURSOR buttons I_, • or • to highlight
and select START TIME HOUR/MINUTE, AM OR
PM.
Use the CURSOR buttons I_, • or • to highlight
and select FINISH TIME HOUR/MINUTE, AM or
PM.
Use the CURSOR buttons • or • to set MONTH,
DAY and YEAR.
Use the CURSOR buttons I_, • or • to highlight
and select CABLE or AIR.
Use the CURSOR buttons I_, • or • to set the
channel the TV will tune to.
49