Hitachi 62VS69 Operating Manual page 39

Use thefunctions below ifyour T Visconnected toan
amplifier/receiver with OPTICAL
DIGITAL INPUT with
Dolby Digital or PCM decoder capabilities.
1. Use the CURSOR buttons • or • to highlight the
function to be adjusted.
2. Press the CURSOR buttons • or I_ to adjust the
function.
3. Press EXIT to quit the menu or select AUDIO to
return to the main menu.
Language
Some programs transmit more than one DTV language option. Most will have English as a default language. The
language function will allow you to select up to 4 language options (if available).
Digital Outpul
This function allows you to select between Dolby c°Digital and PCM.
Dolby _°Digital Select this feature if the TV is connected to an amplifier/receiver with a Dolb,¢ _ Digital only
decoder; it will provide six independent soundtrack channels through the optical output
jack (Digital Audio).
PCM Select this feature if the TV is connected to an amplifier/receiver with a PCM only
decoder; it will provide two independent soundtrack channels through the optical output
jack (Digital Audio).
Manufactured under ficense from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
#RC
Dynamic Range Compression - Use this function to compress the range of sound volume. By compressing the
range of sound volume, it is possible not only to suppress the output of loud sound at night but also to raise the
volume of low sound. This is only effective when the TV is connected via the optical out (digital audio) to an
amplifier/receiver with a Dolby_) Digital decoder. The default setting is ON. Use the CURSOR buttons • or I,, to
select the chosen options.
39