Hitachi 62VS69 Operating Manual page 12

Lcd rear projection television
Hide thumbs Also See for 62VS69:
Table of Contents

Advertisement

O
@
TV AS CENTER
(INPUTS
1-4)
These jacks are for stereo amplifiers
with center
signal output
capability.
This feature allows the TV
speakers
to be used as a center speaker. The TV
must be set as a center
channel
by selecting
"IV
AS CENTER
on the Internal
Speakers
Settings
of
the Audio Menu (see page 38).
CableCARD
Slot
This slot is for the CableCARD
that will be provided
by your local cable operator
to gain access to
chosen
cable channels.
The CableCARD
will allow
you to tune digital and high definition
cable
channels.
Please call your local cable operator
if
this service
is available
before requesting
a
CableCARD
(also known
as Point of Deployment
(POD) module).
1.
Connect
a coaxial cable to cable terminal
of
the Rear Panel Jacks.
2.
Insert the CableCARD
into the slot (Top of card
should
be facing right as shown below).
If the CableCARD
is properly
installed
or not installed,
the TV will display
the following
respective
screens.
After the CableCARD
is installed,
wait until the second
screen
below appears.
The third screen below will
appear
if a channel
is not authorized
for viewing.
Press
the EXIT button to exit the second
screen.
Please take note of all information
on the screen (you
will provide
this information
to your cable operator).
Call your cable operator
and give them the information
from the card to start your cable service.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

55vs69

Table of Contents