Hitachi 62VS69 Operating Manual page 17

CONNECTING A COMPOSITE VIDEO AND
STEREO AUDIO SOURCE TO INPUT1 - INPUT5
1,
2,
3,
4,
5,
Connect the cable from the VIDEO OUT of the VCR
or the laserdisc player to the INPUT (VIDEO) jack,
as shown on the TV set on the right.
Connect the cable from the AUDI© OUT R of the
VCR or the laserdisc player to the INPUT
(AUDIO/R) jack.
Connect the cable from the AUDI© OUT L of the
VCR or the laserdisc player to the INPUT (AUDIO/L)
jack.
Press the INPUTS button, then select INPUT 2
from the INPUTS menu to view the program from
the VCR or laserdisc player. The VIDEO OSD label
disappears automatically after approximately four
seconds.
Select CABLE from the INPUTS menu to return to
the previous channel.
VCR
CONNECTING AN S-VIDEO
SOURCE TO INPUT 1T 2 AND 5
1. Connect the cable from the S-VIDEO OUT of the
VCR or the laserdisc player to the INPUT (S-VIDEO)
jack, as shown on the TV set on the right.
2. Connect the cable from the AUDI© OUT R of the
VCR or the laserdisc player to the INPUT
(AUDIO/R) jack.
3. Connect the cable from the AUDI© OUT L of the
VCR or the laserdisc player to the INPUT (AUDIO/L)
jack.
4,
Press the INPUTS button, then select INPUT 2
from the INPUTS menu to view the program from
the VCR or laserdisc player. The VIDEO OSD label
disappears automatically after approximately four
seconds.
5. Select CABLE from the INPUTS menu to return to
the previous channel.
° °°2El
R L V
OUTPUT S 0
VCR
17