Installation Instructions - GE JV936 Owner's Manual And Installation Instructions

Installation instructions
iNSTALL FILTERS
= Remove protective film covering the filters.
• Insert the filter into the "(_" clips mounted to the top
of the vertical flont panel.
• Tap the filter against one side to align with outside
opening.
• Pull the filter down into the lower slots at the bottom
of the filter support.
Filters
Junction
Box
i
Filter
Support
* To remove the filters, grasp the handle, push the
filter up and pull forward.
FINALIZE INSTALLATION
* Refer to the operating instructions to test all
contIols.
18